Description:
The Bridge Between Digital and Analog Video
PowerMac, iMac and PC platform video editors now have a simple, competent solution for transferring video and audio back and forth between analog tape and DV.
- DV to analog and analog to DV real-time output conversion for broadcasting applications.
- Stand-alone system design, plug and play, no software installation required
- Option to encode analog audio to digital in either 12 bit or 16 bits
- Built-in stereo audio CODEC for perfect A/V synchronization without time delays
- Compatible with most DV camcorder interfaces; perfect for non-linear video editing system applications
- Fully compliant with power MAC, iMAC DV interface
Key Features
- Selectable video standard:
NTSC (525 lines /60Hz), PAL (625 lines /50Hz).
- Inputs: DV, Y/C, Composite
- Outputs: DV, Y/C, Composite
- Two 6-pin FireWire (iLink) I/O ports, Available in
- NTSC 4:1:1 or PAL 4:2:0 DV25 format (25Mbps data transfer rate)
- Selectable Video level, at 0 IRE or 7.5 IRE
- Video Comb Filter for High Quality Video
- Video input source auto-detection
- Audio Sampling Rate:
Selectable 32KHz (12-bit) or 48 KHz (16-bit) for unbalanced audio.
- Audio Decoding Rate:
Selectable 32KHz, 44.1KHz or 48KHz DV audio decoding
- Formats: DV (iLink), Digital 8, Video 8, Hi8, VHS, S-VHS, VHS-C and S-VHS-C
- Computers: PowerMac, iMac, Windows 98/ME/2000 and XP
Specifications
Front Panel
Digital Video Input:
Two 6-pin FireWire (iLink) I/O ports. Available in NTSC 4:1:1 or PAL 4:2:0, DV25 format (25Mbps data transfer rate)
Analog Video Input: Composite (RCA 75 ohm) 1.0Vp-p
Analog Audio Output: Unbalanced Audio RCA x 2
LED Indicators: Video input source: AV or DV
Digital audio sample rate:
32KHz/12-bit or 48KHz/16-bit.
Rear Panel
Digital Video Output: Two 6-pin FireWire (iLink) I/O ports. Available in NTSC 4:1:1 or PAL 4:2:0, DV25 format (25Mbps data transfer rate)
Analog Video Output: Y/C (S video) (DIN 4-pin 75 ohm) Y: 1.0Vp-p, C: 0.627mVp-p Composite (RCA 75 ohm) 1.0Vp-p
Analog Audio Output: Unbalanced Audio RCA x 2
Dip Switch Settings:
- S1. PAL or NTSC system
- S2. 7.5 IRE / 0 IRE
- S3. Auto / Manual
- (Video input detection)
- S4. Win2K / Normal mode
General Power input: + DC 5V, 6Watts
